On Wednesday, the ATC reconnaissance team sub-groups were rearranged. Ramon and Jennifer’s group visited the Condesa neighborhood in the northern part of the city. Here the team assessed two buildings, one of which suffered some damage, and the other nearly none. Another group, including Laura Hernandez, focused on the southern area of Mexico City where they saw several structures with distinct damage

GMS engineers and the other members of the Applied Technology Council (ATC) reconnaissance team arrived in Mexico City and coordinated their plan of action to study the effects of the 9/19/2017 earthquake on building structures. The first morning, they met at the WSP office to organize the reconnaissance for that day. In order to maximize the use of the researchers’ time, the team was divided into three smaller groups. Each went to a different section in the city to evaluate damage.

GMS engineers departed for Mexico City on Monday to be joined by remaining members of the Applied Technology Council (ATC) reconnaissance team reviewing the aftermath of the 9/19/2017 earthquake. The goal of this reconnaissance mission is to perform detailed assessments of reinforced concrete structures with all levels of damage. The reconnaissance will focus on identifying the likely cause of collapse in concrete buildings that performed poorly, and the likely cause of good performance in non-collapsed buildings in the immediate vicinity.

Mexico is one of the world’s most seismically active regions, sitting atop several intersecting tectonic plates. On September 19, 2017, a magnitude 7.1 earthquake hit the Greater Mexico City area killing 370 people and collapsing 40 buildings. The quake occurred on the 32nd anniversary of the 1985 Mexico City earthquake, which killed around 10,000 people. The 1985 quake was commemorated, and a national earthquake drill was held, at 11 a.m. local time, just two hours before the 2017 earthquake. Twelve days earlier, the even larger 2017 Chiapas earthquake struck 400 miles away, off the coast of the state of Chiapas.

In support of ongoing U.S. Government-funded research and development projects in earthquake engineering, the Applied Technology Council (ATC) Endowment Fund is sponsoring a team of experts to investigate the performance of buildings in Mexico City following the event.

GMS provided structural engineering services for this 440,000 SF interior renovation and re-stack of 9 floors in the McGraw-Hill Building at 1221 Avenue of the Americas. Project included structural modifications and reinforcement for a monumental stairway, health club, full service kitchen and dining area, UPS and data center, as well as roof dunnage and shaft openings for new HVAC equipment.

This new 6-story commercial building in the SoHo Cast Iron Historic District replaces a two-story taxpayer building. The new steel framed structure, designed by BKSK Architects, features a terra cotta rain screen and glass curtain wall facade system that transitions along the building perimeter from punched windows representative of an earlier masonry era, to a more open open frame emblematic of SoHo’s later cast-iron era. The entire 52,000 square foot building is leased by Nike. According to the New York Times, “design fans should soon be recognizing it as one of the most exciting and intelligent structures to be built for decades, anywhere.”

New development is an infrequent occurrence in the East 20s, but from 121 East 22nd Street through to 122 East 23rd Street, Toll Brothers City Living is almost finished on their latest project, designed by the Office of Metropolitan Architecture. GMS is providing exterior envelope consulting services for this new mid-rise residential condominium building.

The Woolworth building will be the first “Building of the Day” celebrating this year’s Archtober. Archtober (ärk’tōbər) is New York City’s Architecture and Design Month, the annual festival of architecture tours, lectures, films, and exhibitions taking place during October.

There are approximately 50,000 buildings on the 22.8 square mile island of Manhattan and the majority of construction occurs in densely built areas only a few feet from occupied buildings. When your neighbor builds or renovates, there may be residual effects on your property.

Jonathan Hernandez, GMS Partner, was inducted as the President-Elect for the Structural Engineers Association of New York (SEAoNY) for 2017-2018. The ceremony occurred during SEAoNY’s Annual Meeting, held at the Center For Architecture in New York on September 14, 2017.<!–more–>

The purpose of SEAoNY is to advance the art of structural engineering in New York by improving the flow of ideas and building the community of colleagues. SEAoNY also reaches out to other professionals, outside the engineering community, who work in related fields with common interests. The association sponsors workshops, panel discussions, lectures and seminars with the aim of addressing topics of interest and concern to structural engineers. SEAoNY is a member organization of the National Council of Structural Engineers Associations (NCSEA). Jonathan is also a member of the NCSEA Board of Directors.